Many elements will influe to the price of machining the saber: design complexity, differents options (crystal chamber, inside reveal etc.), finish, color, engraving.

For an empty saber (incluedout blade and electronic), the prices can go from 150 to 700 euros.

Prices for electronic configuration are fixed.

The following prices include the installation, blade and charger.

Here is a list of all configuration I can do:

But let’s see in more detail the characteristics of the different configurations:

Configuration A - one blade color and no sound, include:

• 1 battery li-ion 3.7v 3000 ma/h
• 1 specific charger
• 1 recharge port 2.1mm
• 1 switch 12 mm
• 1 blade plug
• 1 Cree led red, green, blue or amber
• 1 polycarbonate blade diameter : 1 inch, lenght : 90 cm

Configuration B - Cree leds and sound board Prizm (more sound and light options, better sensibility), include:

• 1 chassis 3D printed
• 1 soundboard prizm v5 from Plecter labs
• 1 bass speaker 28 mm 2 w
• 1 battery li-ion 3.7v 3000 ma/h
• 1 specific charger
• 1 recharge port 2.1mm
• 1 switch 12 mm
• 1 auxillary switch
• 1 blade plug
• 1 Cree led RGB
• 1 polycarbonate blade diameter: 1 inch, lenght 90 cm
• 1 sound board configuration

Configuration C - Cree leds and sound board CFX, include:

• 1 chassis 3D printed
• 1 soundboard Crystal focus 10 from Plecter labs
• 1 bass speaker 28 mm 2 w
• 1 battery li-ion 3.7v 3000 ma/h
• 1 specific charger
• 1 recharge port 2.1mm
• 1 switch 12 mm
• 1 auxillary switch
• 1 blade plug
• 1 Cree led RGB
• 1 polycarbonate blade diameter: 1 inch, lenght 90 cm
• 1 sound board configuration

Configuration D - ledstrip (neopixel) and sound board Prizm, include:

• 1 chassis 3D printed
• 1 soundboard Prizm v5 from Plecter labs
• 1 bass speaker 28 mm 2 w
• 1 battery li-ion Keeppower 3.7v 3200 ma/h
• 1 specific charger
• 1 recharge port 2.1mm
• 1 switch 12 mm
• 1 auxillary switch
• 1 blade plug
• 1 rice port and rice cable (connect to the computer)
• 1 pcb neopixel connector 7 pins inclued light
• 1 polycarbonate blade inclued neopixel diameter : 1 inch, lenght : 90 cm or less
• 1 sound board configuration

Configuration E - ledstrip (neopixel) and sound board CFX, include:

• 1 chassis 3D printed
• 1 soundboard Crystal focus 10 from Plecter labs
• 1 bass speaker 28 mm 2 w
• 1 battery li-ion Keeppower 3.7v 3200 ma/h
• 1 specific charger
• 1 recharge port 2.1mm
• 1 switch 12 mm
• 1 auxillary switch
• 1 blade plug
• 1 pcb neopixel connector 7 pins inclued light
• 1 polycarbonate blade inclued neopixel diameter : 1 inch, lenght : 90 cm or less
• 1 sound board configuration